WHAT IS THE WEIGHT OF THE ALLSAW?

The BA200X weighs 8.4lb (3.8kg) without batteries or blades installed

WHAT IS THE ELECTRICAL RATING?

The BA200X operates on a nominal electrical rating of 54V

WHERE CAN I FIND OPERATOR INSTRUCTIONS?

Operator instructions for the BA200X can be found in the Downloads section of this page.

WHAT IS THE VIBRATION LEVEL WHEN USING THE MACHINE?

The BA200X has following vibration levels, ensuring comfortable and controlled handling. Vibration emissions GP Blade (k=1.5) 6.4 m/s2 Vibration emissions Plunge Blade (k=1.5) 4.6 m/s2 Vibration emissions Head Joint Blade (k=1.5) 3.9 m/s2

WHAT SIZE IS THE ALLSAW?

Dimensions of the BA200X (without blades): Length: 17.7” (450mm) / Width: 3” (75mm) / Height: 9.9” (240mm)

IS THERE A MINIMUM ORDER QUANTITY ON BLADES & PARTS?

No, there is no minimum order quantity. However, all orders are subject to carriage fees, and packs are not split.

WHAT CAN THE ALLSAW BE USED FOR?

The BA200X is ideal for cutting a variety of materials, including: Most types of bricks: Soft stone (excluding engineering bricks or concrete), Wood, Plastics, Tree roots, Turf

HOW FAR DO THE BLADES MOVE WHEN IN MOTION?

The blades on the BA200X move between 12–15mm during operation, depending on the blade type. For XL Blades or specialized geometries, this motion may vary slightly.

HOW MANY BLADES ARE IN A SET?

All Blades are supplied and used as a pair.

WHAT ARE THE BLADES MADE OF?

The body of the blades are mild steel and the Teeth are Tungsten Carbide.

CAN I USE THE ALLSAW ON HERITAGE BUILDING SITES?

The Allsaw has been used, and specified for use on numerous Heritage Sites. You may need to obtain the approval for use on your site of your local Listed Building or Heritage Officer first.

MY ALLSAW HAS STOPPED WORKING ALTOGETHER, WHY IS THIS?

1. Check the battery is installed correctly 2. Check the motor brushes, when they wear down a sprung loaded plastic pin built into the brush pops out to push the brush off the armature, to prevent damage to the armature.

HOW DO I TIGHTEN THE BELT SO IT DOESN’T KEEP COMING LOOSE?

If the Drive Belt is fitted and tensioned correctly, they rarely come loose unless the Allsaw is used incorrectly, using force or without the ‘Rocking Action’, jamming the blades in the cut, then using the motor to free them, thus causing the belt to slip and wear.

WHY HAVE MY BLADES STOPPED WORKING?

If the Allsaw motor is running and the blades are not moving, it is probably because the Drive Belt has broken.

Roll over image to zoom in

Arbortech ALLSAW BA200X - Kit

Name: Arbortech ALLSAW BA200X - Kit
Brand: Arbortech
SKU: ARM-00102
Price: 1349.0 GBP
Availability: InStock

Cordless 54V, Dewalt Battery, Charger & 2 Blades

£1,349 .00 excl. VAT £1,618.80 incl. VAT

ArbortechSKU: ARM-00102

The ALLSAW BA200X Cordless offers exceptional cutting capability for today’s masonry and restoration projects. This powerful tool retains all the great features of our next-generation AS200X but breaks free of power cords. Powered by the DEWALT® FLEXVOLT® system, the BA200X operates on 54V battery power delivering maximum performance, superior efficiency and excellent runtimes. Leave behind power outlets and extension cords with the convenience and safety of industry-leading battery technology. With enhanced ergonomics and a Quick Switch Blade system, the BA200X is ready to renovate. The advanced dust control and non-kickback cutting action offer industry professionals a safe and precise option in challenging restoration environments.
Power and Performance -The BA200X is designed for use exclusively with DEWALT® FLEXVOLT® 54V battery packs and chargers. The FLEXVOLT® system allows users to get the most out of their power tool with a single-battery system that provides exceptional power and runtime. With its efficient brushless motor, the BA200X not only delivers high performance and extends tool life, it also allows for a much shorter design, enhancing usability and manoeuvrability.Cut Square, Cut Deep -The unique patented orbital cutting action of the two reciprocating blades allows the cutting of asphalt, wood, tree roots, brick, mortar, and masonry faster than traditional reciprocating saws.This cutting action also produces minimal airborne dust, offering a safe and controllable operation, with the ability to cut to a depth of 4 3/4" (120mm), cut square corners, and make variable-width cuts without overcutting.Convenience -The convenience of cordless proves invaluable, particularly on larger work sites where power points or cable lengths may be impractical. Its cordless design eliminates the need to manoeuvre cords, reducing the risk of tripping hazards.Quick Switch & Flex Grip Technology -All-New Quick Switch Blade System makes switching up blades quick and easy for improved on-site productivity.Improved Flex Grip Handle with adjustable rubber grip provides better handling and flexibility when cutting brick and mortar.Minimise Dust -Achieve superior dust reduction and collection when fitted with the flexible, heavy-duty dust boot uniquely engineered for the BA200X.The unique patented cutting technology produces minimal airborne particles, reducing the risk of silicosis and creating a safer working environment with less mess.Any residual dust is captured with the Heavy Duty Dust Boot, while still providing optimum visibility to complete the job.

Read complete description

Quantity:

Submit enquiry

Arbortech ALLSAW BA200X

Arbortech ALLSAW BA200X - Kit

POPULAR

Arbortech Allsaw 200X XL General Purpose Blades Set

£1,513.99 excl. VAT

Arbortech ALLSAW BA200X - Kit - £1,349.00 excl. VAT

Arbortech Allsaw 200X XL General Purpose Blades Set - £164.99 excl. VAT

BA200X Product Video

200X Quick Switch Blade Change

Re-Turfing a Golf Green

The ALLSAW BA200X Cordless offers exceptional cutting capability for today’s masonry and restoration projects. This powerful tool retains all the great features of our next-generation AS200X but breaks free of power cords. Powered by the DEWALT® FLEXVOLT® system, the BA200X operates on 54V battery power delivering maximum performance, superior efficiency and excellent runtimes. Leave behind power outlets and extension cords with the convenience and safety of industry-leading battery technology. With enhanced ergonomics and a Quick Switch Blade system, the BA200X is ready to renovate. The advanced dust control and non-kickback cutting action offer industry professionals a safe and precise option in challenging restoration environments.

Power and Performance -
The BA200X is designed for use exclusively with DEWALT® FLEXVOLT® 54V battery packs and chargers. The FLEXVOLT® system allows users to get the most out of their power tool with a single-battery system that provides exceptional power and runtime. With its efficient brushless motor, the BA200X not only delivers high performance and extends tool life, it also allows for a much shorter design, enhancing usability and manoeuvrability.

Cut Square, Cut Deep -
The unique patented orbital cutting action of the two reciprocating blades allows the cutting of asphalt, wood, tree roots, brick, mortar, and masonry faster than traditional reciprocating saws.

This cutting action also produces minimal airborne dust, offering a safe and controllable operation, with the ability to cut to a depth of 4 3/4" (120mm), cut square corners, and make variable-width cuts without overcutting.

Convenience -
The convenience of cordless proves invaluable, particularly on larger work sites where power points or cable lengths may be impractical. Its cordless design eliminates the need to manoeuvre cords, reducing the risk of tripping hazards.

Quick Switch & Flex Grip Technology -
All-New Quick Switch Blade System makes switching up blades quick and easy for improved on-site productivity.

Improved Flex Grip Handle with adjustable rubber grip provides better handling and flexibility when cutting brick and mortar.

Minimise Dust -
Achieve superior dust reduction and collection when fitted with the flexible, heavy-duty dust boot uniquely engineered for the BA200X.
The unique patented cutting technology produces minimal airborne particles, reducing the risk of silicosis and creating a safer working environment with less mess.

Any residual dust is captured with the Heavy Duty Dust Boot, while still providing optimum visibility to complete the job.

User Manual

Cutting depth/width	170mm (6 3/4”)/6.5mm (1/4”) depending on blade
No load speed	5200 RPM
Power	2300 Watt
Voltage	54V
Weight	3.8 Kg (8.4lb) without blades & battery

1 x ALLSAW BA200X

1 x 200X Dust Boot

1 x 200X GP Blade

1 x 200X Plunge Blades

1 x Blade Pouch

1 x DEWALT® 54V FLEXVOLT® 9.0Ah Battery

1 x DEWALT® 18V-54V Battery Fast Charger

1 x ALLSAW Carry Case

The AS200X ALLSAW features a unique patented orbital cutting action with two reciprocating blades that strike and rake during operation. This allows precise cutting of brick (excluding engineering or dense bricks), mortar, and masonry up to 50 MPa. The AS200X can cut to a depth of 4¾” (120mm) with minimal airborne dust, providing safe and controlled operation. It excels in cutting square corners, removing single bricks, and tackling challenging tasks like cutting aged masonry, dirty soil-impregnated wood, and tree roots.

Always wear a suitable dust mask (FFP3(S) protection recommended). Dust Extraction: The BA200X comes with a Heavy Duty Dust Boot engineered to significantly reduce airborne particles. It attaches to the wire guard and extraction fitting, which connects to a vacuum via a standard 30mm bore. Important Note: Ensure the vacuum used has the proper filtration system (certified M or H Class filters) to effectively manage silica dust. See our range of M and H Class Dust Management Vacuums for compliance with HSE standards.

How long the blades last is very dependent on how the Allsaw is used and what materials it is used on. Used with the ‘sawing/rocking motion’ in softer materials and mortars the blades can last a very long time. The key to long life is to know what you are cutting, keep the saw moving in the cut to clear the dust from around the blades which helps to keep the blades cool, also avoid hammering the ends of the blades, as this wears away the metal that hold the Tungston Carbide Teeth, and only apply enough pressure to keep the saw in contact with the masonry. If the Allsaw is bouncing and there is heavy vibration whilst trying to cut a material then it is very likely the material is too hard for the Allsaw to cut. CAUTION: Do not use on engineering or dense hard bricks, concrete, metal, hard stone, or very dense materials, as these materials will cause damage to the teeth.

The Allsaw will cut soft – medium density bricks and mortar. By ‘Rule of Thumb’, if the material you wish to cut will scratch to leave an impression with, a nail, screw, screwdriver, etc…. then the Allsaw will cut it when used with a ‘Rocking /Sawing Action. It will not cut engineering, or very hard dense bricks, or very strong cementitious mortars. See Answer To What is the ‘Rocking Action’ above

The Allsaw cannot be used on concrete, or dense concrete blocks. It will cut materials up to 50 mpa, so will cut light density concrete blocks, it depends what the 7.2 Nm concrete blocks have been manufactured from whether the Allsaw is suitable for them. If they have heavy aggregate or granite chippings in these will damage the Tungsten Carbide Teeth on the blades.